Reasons For Low Sand Output Of Sand Making Machine2019-12-13

Reasons For Low Sand Output Of Sand Making Machine

Summary:What is the reason for the low sand output of the sand making machine? In actual production, the output of the sand making machine is related to many factors, s

Too tired to read? Try staff service!

Engineer one-to-one for you, draw up plans in time, and provide investment estimates in time!

Get Price Staff Service

What is the reason for the low sand output of the sand making machine? In actual production, the output of the sand making machine is related to many factors, such as: material hardness, humidity, finished sand fineness, equipment maintenance and its own quality, etc. Today we will talk about the factors that affect the output of sand making machines.

Different crushed materials

Different materials have different hardness, viscosity, humidity, etc., and the sand output of the sand making machine will be different. details as follows:

Material viscosity

The greater the viscosity of the material, the easier it is to adhere. The material with high viscosity will adhere to the inner wall of the sand making chamber in the sand making machine. If it cannot be cleaned in time, it will seriously affect the working efficiency of the sand making machine and seriously affect the normal work of the sand making machine. Therefore, when selecting materials, it must be noted that the viscosity of the materials cannot be too large.

Composition of materials

The more fine powder contained in the material before the sand making, the more it affects the sand making, because these fine powders are easy to adhere and affect the transportation. Therefore, materials with a large amount of fine powder should be sieved once in advance, and the fine powder should be screened out of the material as much as possible, so as not to affect the normal operation of the sand making machine.

Material humidity

If the water content is high, the material will be easily adhered when crushed in the sand making machine, and it will be easily blocked during the feeding and conveying process, resulting in reduced sand making capacity. To solve this problem, we must strictly control the humidity of the material when selecting the material. If the humidity of the material is too high, we can use sunlight or air-drying to reduce the percentage of moisture in the material.

Material hardness

The harder the material is, the more difficult it is to sand, and the more severe the wear on the equipment. The speed of sand making is slow, but of course the sand making capacity is small. This requires us to be moderate in the choice of materials.

Different sand fineness

The higher the fineness requirement, that is, the finer the material required for sand making, the smaller the sand making capacity. This aspect depends on the specific requirements of the ore dressing plant. If there is no special requirement, the fineness of the material can be set to medium fine.

Sand making machine model difference

Each manufacturer's sand making machine models have certain differences. The sand production and energy consumption of different types of equipment during operation are different. Users should have a certain understanding of their production when purchasing equipment. Purchasing a suitable model of sand making machine will not only affect the output of the equipment, but may also cause users to spend higher costs.

Whether standard operation and regular maintenance

The standard operation and regular maintenance of the sand making machine will also affect the sand output of the equipment. If a sand making machine operates irregularly and does not perform regular maintenance during operation, it will cause the wear of the wearing parts of the equipment to accelerate, which will greatly reduce the life of the equipment, and the production volume per unit time will be small.

The quality of the sand making machine itself varies

A high-quality sand making machine is not only energy-saving and environmentally friendly, but also can easily reach the expected output of the equipment. Not only that, high-quality equipment manufacturers use new high-wear-resistant materials in production and use internationally leading production technologies. The produced equipment can well meet the user's production needs, and provide a more favorable guarantee for continuous, efficient and safe production.

Is the design of the sand production line appropriate?

The final output is related to all the equipment of the entire production line. For example, if your output requires 500t / h, then you can't just require that the hourly output of the sand making machine reaches 500t, and the treatment of the front jaw break, cone break, belt conveyor, etc. The amount must also be matched with it, otherwise the final output will certainly not reach. The configuration of a production line must consider all factors in order to meet your capacity requirements.

To sum up, the failure of the sand making machine to reach the original output has a lot to do with the above 6 factors. Users should consider their own production conditions in order to find the equipment suitable for their material crushing.

Request a Quotation

Hot Sale